Manual Garmin GPSMAP 60CSx

The Garmin GPSMAP 60CSx is a rugged, waterproof handheld GPS unit featuring a high-sensitivity GPS receiver, a bright color TFT display, a built-in electronic compass, barometric altimeter, microSD card slot for map storage, and extensive mapping capabilities. It supports turn-by-turn routing, track logging, waypoint management, and geocaching. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using GPS Navigation 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-sensitivity GPS receiver, Color TFT display, Electronic compass, Barometric altimeter, microSD card slot, USB interface, and Waterproof casing.

Feature	Description
High-sensitivity GPS receiver	For improved reception under trees and in urban canyons
Color TFT display	Bright, sunlight-readable 256-color screen
Electronic compass	Provides heading when stationary
Barometric altimeter	Tracks changes in pressure to determine altitude
microSD card slot	For loading detailed maps and storing data
USB interface	For connecting to a computer for data transfer
Waterproof casing	Rated to IEC 60529 IPX7 standard
POWER	Turns unit on/off
ZOOM IN/OUT	Adjusts map scale
PAGE	Cycles through main pages (Map, Compass, etc.)

Installation

Unpack and inspect contents. Install batteries.

Install batteries: Open battery compartment, insert two AA batteries observing polarity.
Insert microSD card (optional): For additional maps, insert card into slot.
Acquire satellite signals: Go outdoors with clear sky view, power on unit.
Attach wrist strap: For secure handling during use.

WARNING! Use only recommended batteries. Do not expose to extreme temperatures for extended periods.

First-Time Setup

Power on unit; follow on-screen prompts.

Set language: Use MENU > Setup > System > Language to select.
Calibrate compass: Follow on-screen instructions on the Compass page.
Set time and date: Configure in MENU > Setup > Time.
Configure map datum and position format: Set in MENU > Setup > Units.

CAUTION! Calibrate compass away from metal objects and magnetic fields for accuracy.

Specifications

Display: 2.6-inch diagonal, 256-color TFT.
GPS Receiver: High-sensitivity, WAAS-enabled.
Sensors: Electronic compass, barometric altimeter.
Memory: Internal memory plus microSD card slot.
Interface: USB and serial (for older models).
Battery Life: Up to 18 hours (typical use with two AA batteries).
Waterproof: IEC 60529 IPX7 standard (submersible in 1 meter of water for 30 minutes).
Operating Temp: -15°C to 70°C.

Controls and Settings

Access menus via the MENU button. Front Panel: POWER, PAGE, ROCKER key (up/down/left/right/ENTER), ZOOM IN/OUT.

Main Pages: Map, Compass, Altimeter, Main Menu, Satellite Status.

Settings: Use MENU > Setup to configure System, Display, Tones, Time, Units, Routing, and more. Map: Configure detail, orientation, and data fields. Tracks: Set recording method and interval. Waypoints: Manage saved locations.

Connecting Devices

USB: For computer connection and data transfer. Serial (optional): For NMEA output to other devices.

Turn off unit before connecting cables.
Connect USB cable to computer and unit's USB port.
Use Garmin software (e.g., MapSource, BaseCamp) to transfer maps, waypoints, tracks, and routes.

Tip: Ensure you have the latest USB drivers installed on your computer.

Using GPS Navigation

Supports waypoint navigation, track following, and turn-by-turn routing with detailed maps.

Mark a waypoint: Press and hold ENTER key at desired location.
Navigate to a waypoint: From the Find menu, select a waypoint and choose "Go To".
Follow a route: Create or load a route, then activate it for navigation.
Record a track: Ensure track log is on; the unit records your path.
Use the compass page: For bearing and distance to destination.
Use the map page: View your position and route on the map.
Manage data: Save/delete waypoints, tracks, and routes via the Main Menu.

WARNING! GPS accuracy can be affected by environmental factors. Always carry a paper map and compass as backup.

Accessibility Features

Display Contrast and Backlight: Adjustable for visibility in various lighting conditions. Audible Alerts: Can be enabled for proximity to waypoints or off-course warnings.

Care & Cleaning

Remove batteries if storing for extended periods. Clean casing with a damp cloth; do not use harsh chemicals.

CAUTION! Do not submerge while ports are open. Ensure battery compartment seal is intact for waterproofing.

Regulatory Information

FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Garmin Ltd. or its subsidiaries. For support, visit www.garmin.com/support or contact Garmin Product Support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Dead batteries	Install fresh AA batteries; check polarity.
Poor GPS reception	Obstructed view of sky	Move to an open area; ensure unit is held correctly.
Compass inaccurate	Need calibration/interference	Recalibrate compass away from metal/electronics.
Computer not recognizing unit	Driver/USB cable issue	Reinstall USB drivers; try a different USB cable/port.
Screen is blank	Backlight off/battery	Press POWER to adjust backlight; check batteries.

Reset: Perform a master reset via MENU > Setup > System > Reset (note: this erases all user data).

Service: Contact Garmin Product Support or visit www.garmin.com.