Garmin GPSMAP 695 User Manual

The Garmin GPSMAP 695 is a sophisticated aviation-grade GPS navigation system featuring a high-resolution sunlight-readable display, integrated Jeppesen database, terrain and obstacle awareness, XM weather and audio capabilities, and comprehensive flight planning tools. Designed for general aviation, it provides reliable navigation, situational awareness, and communication support. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Navigation & Flight Planning 8. XM Weather & Audio 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-resolution color display, integrated GPS receiver, XM satellite receiver, audio panel interface, SD card slot, external antenna port, and power/data connector.

Feature	Description
Display	6.1-inch diagonal, sunlight-readable, 256-color TFT
GPS Receiver	High-sensitivity, WAAS-enabled
Database	Integrated Jeppesen NavData (updated via subscription)
Terrain Awareness	TAWS (Terrain Awareness and Warning System)
XM Capability	XM Weather and XM Radio (subscription required)
Audio Panel Interface	Compatible with GMA 340/350 and others
SD Card Slot	For database updates and user data storage
Power Input	10-32 VDC, typical aircraft power
External Antenna Port	For optional external GPS antenna
Flight Planning	Direct-to, flight plan creation, and nearest airport search

Installation

Unpack and inspect contents. Ensure proper mounting location in aircraft.

Mounting: Secure unit in approved mounting tray using supplied hardware. Ensure clear view and reach for pilot.
Power Connection: Connect red wire to aircraft bus (10-32 VDC), black wire to ground.
Antenna: Connect internal or optional external GPS antenna to antenna port.
Audio Integration: Connect audio interface cable to compatible audio panel (e.g., GMA 340).
XM Antenna: For XM services, install and connect XM antenna (if subscribed).

WARNING! Installation should be performed by a qualified avionics technician. Ensure all connections are secure and comply with aircraft regulations.

First-Time Setup

Power on unit; follow on-screen prompts.

Initialization: Allow GPS to acquire satellite signals (may take several minutes).
Database Activation: Enter Jeppesen NavData card or activate via subscription.
System Configuration: Set units (nm, km), time format, and map orientation (North Up/Track Up).
Audio Setup: Configure audio panel interface settings if connected.
XM Setup: Activate XM Weather and/or Audio subscription and configure channels.

CAUTION! Verify all navigation data is current before flight. Do not rely on outdated databases.

Specifications

Display: 6.1-inch diagonal, 480 x 640 pixel resolution.
GPS Receiver: WAAS-enabled, 12 parallel channels.
Database: Jeppesen NavData (airports, navaids, procedures).
Terrain/Obstacle: TAWS with color-coded alerting.
XM Weather: NEXRAD, METARs, TAFs, lightning, etc. (subscription).
XM Audio: Over 170 channels of commercial-free music, news, sports.
Audio Interface: Compatible with Garmin GMA series and others.
Power Requirements: 10-32 VDC, 1.5A max.
Operating Temp: -15°C to +55°C.
Dimensions: 7.0" W x 3.6" H x 9.5" D (mounting tray included).

Controls and Settings

Access menus via dedicated buttons and rotary knob. Front Panel: POWER, VOLUME knob, Direct-to (D) button, MENU, CLR, ENT, and rotary knob with PUSH-ENTER.

On-Screen Controls: Map, Nearest, Flight Plan, Aux, and Main Menu pages.

Map Settings: Range, orientation, detail level, overlays (terrain, traffic, weather). Navigation: Direct-to, flight plan creation/edit, airway selection. System: Setup for units, time, display brightness, audio, and database management. XM: Weather product selection, audio channel browsing.

Connecting Devices

GPS Antenna: Internal or external via port. Audio: To compatible audio panel. XM: XM antenna for weather/audio.

Ensure aircraft power is OFF before making connections.
Use approved cables and connectors for all interfaces.
Secure all wiring away from moving parts and heat sources.
Test all functions (GPS, audio, XM) after installation.

Tip: Route antenna cables away from other avionics to minimize interference.

Navigation & Flight Planning

Supports VFR and IFR navigation with current Jeppesen data.

Direct-to Navigation: Press D button, enter identifier or select from map.
Flight Plan: Create from FPL page; add waypoints, airports, navaids, or intersections.
Nearest: Press NRST to find nearest airports, navaids, intersections, or airspace.
Procedures: Load and fly SIDs, STARs, and instrument approaches (if equipped).
Map Usage: Pan and zoom with rotary knob; display terrain, traffic, and weather overlays.
Waypoint Info: Select any waypoint on map for detailed information page.
Fuel Planning: Enter fuel data for fuel remaining and endurance calculations.

WARNING! This is an advisory system only. Pilot must maintain situational awareness and adhere to all ATC instructions and published procedures.

XM Weather & Audio

XM Services require active subscription.

XM Weather: Access via WX button or map overlay. Products include:

NEXRAD Radar (Composite and Regional)
METARs and TAFs
Lightning Strikes
Graphical Winds Aloft
SUA Status

XM Audio: Access via AUX page. Browse categories (Music, News, Sports, Talk). Adjust volume with knob. Audio is muted during COM transmissions if integrated with audio panel.

Care & Maintenance

Power off unit before cleaning. Use a soft, dry, lint-free cloth for display and casing. For stubborn smudges, lightly dampen cloth with water. Do not use solvents, ammonia-based cleaners, or aerosol sprays.

Database Updates: Update Jeppesen NavData regularly via subscription and SD card.

CAUTION! Do not spray liquids directly on unit. Keep away from excessive heat, moisture, and direct sunlight when not installed.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. TSO Certified: Meets FAA Technical Standard Order C146a for Stand-Alone Class 2/3 Electronic Terrain and Obstacle Awareness Systems. Copyright © Garmin Ltd. or its subsidiaries. Jeppesen data provided under license. XM services require separate subscription and are subject to XM terms and conditions. For support, visit www.garmin.com/aviation or contact Garmin Aviation Support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No Power	Power connection, fuse	Check aircraft power; verify connections; check fuse.
Poor GPS Reception	Antenna obstruction	Ensure clear view of sky; check antenna connection.
No XM Weather/Audio	Subscription, antenna	Verify active subscription; check XM antenna connection and location.
Database Expired	Update required	Update Jeppesen NavData via SD card.
No Audio from XM/MP3	Audio panel settings, volume	Check audio panel source selection; adjust volume on unit and panel.
Screen is dim/unreadable	Brightness setting	Adjust display brightness in System Setup menu.
Unit locks up/freezes	Software glitch	Perform soft reset (power cycle). If persistent, contact support.

Reset: Power cycle unit. For persistent issues, consult maintenance manual for hard reset procedure.

Service: Contact Garmin Aviation Support or an authorized Garmin dealer. Do not attempt to open the unit.