Garmin GPSMAP 695 Manual

The Garmin GPSMAP 695 is a premium aviation portable GPS navigator featuring a sunlight-readable 7-inch display, integrated Jeppesen database, terrain and obstacle alerts, XM weather and audio capabilities, and support for VFR/IFR navigation. It includes moving map, flight planning, and extensive situational awareness tools. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Database Management 8. Flight Planning 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7-inch sunlight-readable display, integrated GPS/WAAS receiver, XM weather/audio receiver, SD card slot, USB port, audio jack, external antenna port, and aviation database.

Feature	Description
Display	7-inch diagonal, 800 x 480 pixels, sunlight-readable
GPS Receiver	High-sensitivity, WAAS-enabled
Database	Integrated Jeppesen aviation database (updated via subscription)
XM Capability	XM weather (NEXRAD, METARs, TAFs) and XM radio (optional)
Terrain & Obstacle	Terrain Awareness and Warning System (TAWS)
Audio Jack	3.5mm for audio output or intercom connection
USB Port	For data transfer and database updates
SD Card Slot	For additional maps, data storage, and software updates
Power Input	10-32 VDC aircraft power or external adapter
External Antenna Port	For optional external GPS antenna

Installation

Unpack and inspect contents. Designed for portable or panel-mount use.

Portable Mounting: Use included yoke mount or suction cup mount on windshield.
Panel Mounting: Requires optional panel-mount kit and professional installation.
Connect Power: Use aircraft power cable (10-32 VDC) or vehicle adapter.
Connect Antenna: Use internal antenna or connect optional external GPS antenna.
Connect Audio: Plug audio cable into aircraft intercom or headset.

WARNING! Ensure mounting does not obstruct pilot view or aircraft controls. Secure all cables to prevent interference.

First-Time Setup

Power on unit; follow initial setup prompts.

Acquire GPS Signal: Place unit with clear view of sky; allow several minutes for first fix.
Set Preferences: Configure units (nm/km, ft/m), time format, and map orientation.
Load Databases: Insert SD card with latest Jeppesen database or update via USB.
Configure XM Weather: Activate XM subscription and enter authorization code.
Calibrate Sensors: Perform compass calibration if using magnetic heading.

CAUTION! Do not operate during critical phases of flight. Verify database currency before flight.

Specifications

Display: 7-inch TFT, 800 x 480 pixels, sunlight-readable.
GPS: WAAS-enabled, 12 parallel channel receiver.
Database: Jeppesen NavData (airports, navaids, procedures, obstacles).
Terrain: TAWS-B compliant with color-coded terrain and obstacle alerts.
Weather: XM Satellite Weather (subscription required).
Audio: XM Radio capable, 3.5mm audio output.
Power: 10-32 VDC, typical draw 1.5A at 14V.
Operating Temp: -15°C to 55°C (5°F to 131°F).
Dimensions: 8.3" W x 6.4" H x 2.3" D (portable unit).
Weight: Approximately 2.2 lbs (1 kg).

Controls and Settings

Access menus via dedicated buttons and rotary knob. Front Panel: POWER, VOLUME, Direct-to, MENU, ENT, CLR, and rotary knob.

Display Pages: Map, Trip Planning, Waypoint Information, Nearest, Auxiliary (system status).

Map Settings: Orientation (North Up, Track Up, DTK Up), detail level, terrain display, traffic overlay. Navigation: Direct-to, flight plan creation, airway selection. System: Display brightness, backlight timeout, audio volume, database management, XM settings.

Connecting Devices

Power: Aircraft power cable or 12V adapter. Audio: 3.5mm to intercom. Antenna: External GPS antenna (optional). Data: USB to computer for updates.

Ensure unit is powered off before connecting cables.
Connect power cable to aircraft power bus or cigarette lighter adapter.
Connect audio cable to aircraft intercom or audio panel.
For XM weather, connect XM antenna with clear view of southern sky.

Tip: Use ferrite chokes on power and audio cables to reduce interference.

Database Management

Supports Jeppesen NavData and optional terrain, obstacle, and SafeTaxi databases.

Update via USB: Connect to computer with Garmin updater software.
Update via SD Card: Download database to SD card, insert into unit.
Verify Database: Check database information page for effective dates.
Load Custom Waypoints: Import user waypoints from compatible software.
Manage Multiple Databases: Select active database for navigation.

WARNING! Navigation with expired database is prohibited for IFR operations. Always verify database currency.

Flight Planning

Create and modify flight plans with airways, SIDs, STARs, and approaches.

Create New Flight Plan: Press FPL, select New Flight Plan.
Add Waypoints: Enter identifier or select from map.
Insert Airways: Select airway between waypoints.
Add Procedures: Select SID, STAR, or approach for destination.
Activate Flight Plan: Press ACTIVATE to begin navigation.
Modify in Flight: Insert, delete, or reverse waypoints as needed.
Use Direct-to: Press DTO to navigate directly to any waypoint.

CAUTION! Flight planning should not be performed during takeoff, landing, or other critical phases of flight.

Care & Cleaning

Power off and disconnect before cleaning. Use slightly damp, lint-free cloth for display. Do not use solvents or abrasive cleaners.

CAUTION! Avoid extreme temperatures. Store in protective case when not in use. Keep connectors clean and dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. TSO-C146c: Standalone GPS sensor. TSO-C151b: TAWS-B compliant. Copyright © Garmin Ltd. or its subsidiaries. Jeppesen data provided under license. For support, visit www.garmin.com/aviation or contact Garmin Aviation Support at 1-800-800-1020.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No GPS signal	Poor satellite view	Move to location with clear view of sky; ensure external antenna connected properly.
No XM weather	Subscription/antenna	Verify XM subscription active; check antenna connection and orientation.
Unit won't power on	Power connection	Check power cable connection; verify aircraft power bus is active; try external power adapter.
Database not loading	Corrupted SD card	Reformat SD card; reload database; try different SD card.
Inaccurate position	Poor GPS accuracy	Allow more time for satellite acquisition; check for RAIM availability for IFR.
Dim display	Brightness setting	Adjust display brightness in system settings; check auto-dimming settings.

Reset: Hold POWER + CLR during startup for factory reset (erases user data).

Service: 1-800-800-1020; www.garmin.com/aviation