Garmin GPS with Dash Cam Manual

The Garmin GPS with Dash Cam is a dual-function device combining advanced navigation with high-definition dash camera recording. It features GPS satellite tracking, voice-guided navigation, lane assist, live traffic updates, driver alerts, and a built-in dash cam that continuously records driving footage with loop recording, G-sensor impact detection, and parking mode. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using GPS Navigation 8. Dash Camera Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: GPS navigation unit with dash cam lens, Remote Control, Power adapter, Car mount, MicroSD card slot, USB port, Speaker, Microphone.

FeatureDescription
GPS AntennaFor satellite signal reception and positioning
Dash Camera LensWide-angle lens for recording driving footage
MicroSD Card SlotFor storing navigation maps and recorded video
USB PortFor charging and data transfer
SpeakerFor voice-guided navigation and alerts
MicrophoneFor recording audio with video
Power ButtonTurns device on/off
Menu ButtonAccesses settings and features
Record ButtonManually start/stop dash cam recording
Mount ReleaseDetaches device from car mount

Installation

Unpack and inspect contents. Install in vehicle safely.

  1. Mount device: Attach mount to windshield using suction cup; secure device.
  2. Connect power: Plug power adapter into device and vehicle's 12V outlet.
  3. Insert MicroSD card: Format card in device before first use.
  4. Adjust camera angle: Ensure lens has clear view of road ahead.

WARNING! Do not obstruct driver's view. Ensure mount is secure to prevent falling while driving.

First-Time Setup

Power on device; follow on-screen prompts.

  1. Set language: Select ENGLISH (default) in settings.
  2. Configure GPS: Allow device to acquire satellite signal outdoors.
  3. Set date/time: Automatically via GPS or manually.
  4. Format MicroSD card: Required for dash cam recording.
  5. Adjust dash cam settings: Resolution, loop recording, G-sensor sensitivity.

CAUTION! Do not operate device while driving. Perform setup when vehicle is parked.

Specifications

Controls and Settings

Access menus via touchscreen or physical buttons. Front Panel: Power, Menu, Record.

Touchscreen: Tap icons for navigation, settings, playback. On-screen buttons: Volume, Mute, Back, Home.

Navigation Settings: Route preferences (fastest/shortest), avoidances (tolls/ferries), voice guidance volume. Dash Cam Settings: Video resolution (1080p/720p), loop recording duration, G-sensor sensitivity (high/medium/low), parking mode on/off. System Settings: Language, time zone, units (miles/km), brightness, auto power on/off.

Connecting Devices

Power: 12V adapter. Smartphone: Bluetooth for live traffic and updates. Computer: USB for data transfer.

  1. Turn off device before connecting cables.
  2. Pair smartphone via Bluetooth in settings.
  3. Connect to computer to transfer videos or update maps.

Tip: Use included cables for optimal performance.

Using GPS Navigation

Enter destinations and follow guided routes.

  1. Enter address: Tap "Where To?" and input destination.
  2. Select route: Choose fastest, shortest, or eco route.
  3. Start navigation: Tap "Go!" for turn-by-turn guidance.
  4. Receive alerts: Speed limits, traffic, cameras, lane assist.
  5. Detour: Tap to recalculate route if needed.
  6. Save locations: Save home, work, favorites for quick access.

WARNING! Always pay attention to road conditions. Do not interact with device while driving.

Dash Camera Features

Continuously records driving footage; saves clips on impact.

  1. Auto-record: Starts when device powers on via vehicle.
  2. Loop recording: Overwrites oldest files when card is full.
  3. G-sensor: Locks current video if impact detected.
  4. Parking mode: Records if motion detected while parked (requires constant power).
  5. Manual record: Press Record button to save clip.
  6. Playback: View videos on device or computer.

CAUTION! Format MicroSD card regularly to prevent errors. Check local laws regarding audio recording.

Care & Cleaning

Power off and disconnect before cleaning. Use soft, dry cloth for screen and lens; no liquids.

CAUTION! Do not use abrasive cleaners. Keep away from extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Contains FCC ID: XXXX-XXXXX. Copyright © 2025 Garmin Ltd. or its subsidiaries. For support, visit www.garmin.com/support or contact 1-800-800-1020.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerLoose connectionCheck power adapter and outlet; ensure secure connection.
GPS not acquiring signalObstruction/locationMove to open area; ensure clear view of sky.
Dash cam not recordingCard issuesFormat MicroSD card; ensure it is Class 10 or higher.
Poor video qualityDirty lens/settingsClean lens with microfiber cloth; adjust resolution settings.
Device freezingSoftware issueRestart device; update software via Garmin Express.

Reset: Settings > System > Reset to factory defaults if needed.

Service: 1-800-800-1020; www.garmin.com/support

Garmin GPS with Dash Cam Manual © - All Rights Reserved 2025