Garmin GPS Maps 62s Manual

The Garmin GPSMAP 62s is a rugged, waterproof handheld GPS device featuring a high-sensitivity GPS receiver, a 2.6-inch color TFT display, a built-in worldwide basemap, a 3-axis tilt-compensated electronic compass, a barometric altimeter, and supports paperless geocaching. It includes a microSD card slot for additional mapping, supports wireless data sharing, and has a long battery life. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using GPS Navigation 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-sensitivity GPS receiver, 2.6-inch color TFT display, 3-axis electronic compass, barometric altimeter, microSD card slot, USB port, wireless data sharing, paperless geocaching support.

Feature	Description
High-sensitivity GPS receiver	For accurate positioning even in challenging environments
2.6-inch color TFT display	Sunlight-readable, 160 x 240 pixels
3-axis electronic compass	Provides accurate heading while standing still
Barometric altimeter	Tracks changes in pressure to plot elevation
microSD card slot	For additional maps and data storage
USB port	For data transfer and charging (with optional cable)
Wireless data sharing	Share waypoints, tracks, and routes with compatible devices
Paperless geocaching	Store and view geocache details directly on the device
Waterproof rating	IPX7 standard (submersible in 1 meter of water for 30 minutes)
Battery life	Up to 16 hours (2 AA batteries)

Installation

Unpack and inspect contents. Insert batteries and install optional accessories.

Insert batteries: Open battery compartment, insert two AA batteries (NiMH or lithium recommended).
Install microSD card (optional): Insert card into slot until it clicks.
Attach wrist strap: Thread through loop on device.
Charge via USB (optional): Connect to computer or power adapter using USB cable.

WARNING! Use only recommended batteries. Do not expose to extreme temperatures during installation.

First-Time Setup

Power on device; follow on-screen prompts.

Acquire satellite signal: Go outdoors with clear sky view; wait for GPS fix.
Set language: In SETUP menu, select preferred language.
Calibrate compass: Follow on-screen instructions in SETUP > Compass.
Set time and date: Configure in SETUP > System > Time.
Load maps (optional): Install maps via microSD card or Garmin software.

CAUTION! Ensure proper calibration for accurate compass readings.

Specifications

Display: 2.6-inch color TFT, 160 x 240 pixels.
GPS Receiver: High-sensitivity, WAAS enabled.
Sensors: 3-axis electronic compass, barometric altimeter.
Memory: 1.7 GB internal, microSD card slot.
Interface: USB 2.0, wireless data sharing.
Battery: 2 AA batteries (up to 16 hours).
Waterproof: IPX7 standard.
Dimensions: 2.4" x 6.3" x 1.4" (6.1 x 16.0 x 3.6 cm).
Weight: 9.1 oz (258 g) with batteries.
Operating Temp: -4°F to 158°F (-20°C to 70°C).

Controls and Settings

Access menus via PAGE and MENU buttons. Front Panel: POWER, PAGE, MENU, QUIT, ROCKER (up/down/left/right/ENTER).

Side buttons: ZOOM IN/OUT, MARK, FIND.

Main Menu: Map, Compass, Altimeter, Trip Computer, Geocaching, Setup. Setup: System (language, time, display), Tracks, Routing, Marine, Geocaching, Sensors (compass calibration). Map: Orientation (North Up, Track Up), Detail, Zoom levels. Compass: Calibration, Declination adjustment. Altimeter: Calibration, Barometer settings.

Connecting Devices

USB: For data transfer and charging. Wireless: For sharing with compatible Garmin devices.

Connect to computer: Use USB cable to transfer maps, waypoints, tracks.
Wireless sharing: Enable in SETUP > Wireless; select device to share with.
Connect to external sensors (optional): ANT+ compatible sensors (heart rate, temperature).

Tip: Ensure device is powered on when connecting via USB.

Using GPS Navigation

Supports waypoints, tracks, routes, and geocaching.

Create waypoint: Press MARK to save current location.
Navigate to waypoint: Press FIND, select waypoint, choose Go To.
Create route: In Main Menu, select Routes > Create Route.
Record track: Enable track recording in SETUP > Tracks.
Geocaching: Download geocaches via GPX file; navigate using Geocaching menu.
Use compass: Switch to Compass page for heading information.
View altitude: Switch to Altimeter page for elevation data.
Manage maps: Install via microSD; toggle between maps in Map menu.

WARNING! GPS accuracy may be affected by terrain, weather, and satellite geometry.

Accessibility Features

Display settings: Adjust contrast and backlight in SETUP > Display. Audio alerts: Enable tones for waypoint proximity and alerts.

Care & Cleaning

Remove batteries before cleaning. Use soft, damp cloth; avoid solvents.

CAUTION! Do not submerge beyond IPX7 limits. Dry thoroughly if wet.

Regulatory Information

FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to conditions that it does not cause harmful interference. Copyright © Garmin Ltd. or its subsidiaries. For support, visit www.garmin.com/support or contact Garmin Product Support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Batteries	Replace batteries; ensure proper orientation.
Poor GPS accuracy	Signal obstruction	Move to open area; ensure clear view of sky.
Compass inaccurate	Calibration needed	Recalibrate compass in SETUP > Sensors.
Device not connecting to computer	USB cable/driver	Use provided cable; install Garmin USB drivers if needed.
Maps not displaying	Map data/card	Ensure microSD card is properly inserted; enable map in Map menu.

Reset: Hold POWER + PAGE + ROCKER (Up) for 10 seconds to perform master reset (erases user data).

Service: Contact Garmin Product Support; www.garmin.com/support