Garmin GPS Manual 60CSx

The Garmin GPSMAP 60CSx is a high-sensitivity, waterproof handheld GPS receiver featuring a color TFT display, built-in basemap, microSD card slot for detailed mapping, barometric altimeter, electronic compass, and support for turn-by-turn routing and geocaching. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-sensitivity GPS receiver, Color TFT display, Rocker key, ENTER key, PAGE key, POWER key, QUIT key, microSD card slot, USB port.

Installation

Unpack and inspect contents. Install batteries.

1. Install batteries: Open battery compartment, insert two AA batteries (alkaline or NiMH).
2. Install microSD card (optional): Insert card into slot under battery cover.
3. Attach wrist strap: Thread through loop on unit.
4. Power on: Press and hold POWER key.

WARNING! Use only recommended batteries. Ensure battery compartment is dry and sealed.

First-Time Setup

Power on unit; follow on-screen prompts.

1. Acquire satellite signals: Go outdoors with clear sky view; wait for 3D fix.
2. Set language: In SETUP menu, select ENGLISH (default).
3. Calibrate compass: Follow on-screen instructions (rotate unit slowly).
4. Set time and date: Automatic from GPS or manual entry.
5. Load maps: Use MapSource software to transfer maps via USB.

CAUTION! Calibrate compass away from metal objects and magnetic fields.

Specifications

• Display: 2.6-inch diagonal, 256-color TFT.
• GPS Receiver: High-sensitivity SiRFstarIII.
• Memory: 64 MB internal, microSD card slot.
• Battery Life: Up to 18 hours (typical use, two AA batteries).
• Waterproof: IPX7 standard.
• Interface: USB, serial (for older models).
• Waypoints: 1000 with name and symbol.
• Routes: 50 reversible routes with up to 250 points each.
• Operating Temp: -15°C to 70°C (5°F to 158°F).

Controls and Settings

Access menus via MENU key. Front Panel: POWER, PAGE, ROCKER (up/down/left/right), ENTER, QUIT.

Main Pages: Map, Compass, Altimeter, Main Menu, Satellite Status.

Setup: System (language, units, time format), Display (backlight, contrast), Routing (calculation method), Tracks (log interval), Altimeter (calibration), Compass (calibration). Map: Orientation (North Up, Track Up), Detail level, Zoom level. Routes: Create, follow, reverse routes. Waypoints: Mark, edit, navigate to.

Connecting Devices

USB: For data transfer and power. Serial: For NMEA output (optional cable).

1. Turn off unit before connecting cables.
2. Connect USB cable to computer and unit's USB port.
3. Select "USB Mass Storage" mode on unit when prompted.
4. Use MapSource or WebUpdater to transfer maps/firmware.

Tip: Ensure latest USB drivers are installed on computer.

Using GPS Functions

Supports navigation, tracking, geocaching.

1. Mark waypoint: Press and hold ENTER at location.
2. Navigate to waypoint: Select from list, press GOTO.
3. Follow route: Select route, press NAVIGATE.
4. Track log: Enable in TRACK SETUP; view track on map.
5. Geocache: Enter coordinates as waypoint; use compass page to navigate.
6. Use altimeter: View elevation profile; calibrate with known elevation.
7. Use compass: Hold level and rotate slowly for accurate heading.
8. Backtrack: Use TRACK BACK feature to reverse your path.

WARNING! GPS accuracy may be affected by terrain, weather, and satellite geometry.

Accessibility Features

Display: Adjustable contrast and backlight. Audio: Key beep on/off. Navigation: Large font option for distance/bearing.

Care & Cleaning

Turn off and remove batteries before cleaning. Use damp cloth with mild soap; dry thoroughly.

CAUTION! Do not submerge while ports are open. Avoid harsh chemicals.

Regulatory Information

FCC Compliance: Part 15 Class B device. CE Compliance: Meets European directives. Copyright © Garmin Ltd. or its subsidiaries. For support, visit www.garmin.com or contact Garmin Product Support.

Troubleshooting

Reset: Press and hold POWER + PAGE + ROCKER (up) while powering on for master reset.

Service: Contact Garmin Product Support; www.garmin.com