Garmin GPS 600 Manual

The Garmin GPS 600 is a rugged, high-sensitivity GPS receiver designed for outdoor navigation. It features a sunlight-readable color display, preloaded topographic maps, a barometric altimeter, electronic compass, wireless connectivity, and is waterproof to IPX7 standards. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-sensitivity GPS receiver, Color display, USB port, Power button, Menu controls, Mounting bracket.

Feature	Description
GPS Receiver	High-sensitivity with WAAS/EGNOS support
Display	Sunlight-readable, transflective color TFT
Preloaded Maps	Topographic maps with terrain details
Sensors	Barometric altimeter, 3-axis electronic compass
Connectivity	USB, wireless ANT+ for sensor pairing
Battery	Rechargeable lithium-ion, up to 16 hours
Durability	Waterproof (IPX7), rugged design
POWER	Turns device on/off
MENU	Accesses main menu and settings
ZOOM	Zooms map in and out

Installation & Charging

Unpack and inspect contents. Install mounting bracket if needed.

1. Initial Charge: Connect USB cable to computer or wall adapter. Charge fully before first use.
2. Mounting: Attach to handlebar, dashboard, or pack using appropriate bracket.
3. Power On: Press and hold POWER button until device starts.
4. Acquire Satellite Signal: Go outdoors with clear sky view for initial GPS fix.

WARNING! Do not mount where it obstructs vehicle controls. Ensure secure attachment.

First-Time Setup

Power on device; follow on-screen prompts.

1. Select Language: Choose from list (default ENGLISH).
2. Set Units: Choose metric or imperial for distance, elevation.
3. Calibrate Compass: Follow on-screen instructions in open area.
4. Set Time: Choose automatic GPS time or manual setting.
5. Acquire Satellites: Wait for 3D fix (shown on satellite page).

CAUTION! Calibrate compass away from magnetic interference (metal, electronics).

Specifications

• Display: 2.6-inch color TFT, 160 x 240 pixels.
• GPS: High-sensitivity receiver, supports WAAS/EGNOS.
• Maps: Preloaded topographic basemap.
• Sensors: Barometric altimeter, 3-axis tilt-compensated compass.
• Memory: Internal storage for maps and tracks.
• Connectivity: USB 2.0, ANT+ wireless.
• Battery: Rechargeable lithium-ion, 16-hour typical use.
• Waterproof: IPX7 (submersible 1 meter, 30 minutes).
• Operating Temp: -15°C to 60°C.

Controls and Settings

Access menus via MENU button. Front Panel: POWER, MENU, ZOOM IN/OUT, PAGE, QUIT.

Touchscreen: Tap icons, drag map, pinch to zoom (if applicable).

Main Menu: Map, Compass, Altimeter, Trip Computer, Waypoints, Routes, Tracks, Setup. Settings: System (language, units, display), GPS (mode), Sensors (calibration), Routing (preferences), Map (orientation, detail). Profiles: Customize for hiking, biking, automotive.

Connecting to Devices

USB: For charging and data transfer to computer. ANT+: For heart rate monitor, speed/cadence sensor.

1. Turn on device and sensor.
2. Go to Settings > Sensors > Add New.
3. Select sensor type and follow pairing prompts.
4. For USB, connect cable to computer for file transfer.

Tip: Ensure ANT+ sensor is within 3 meters and has fresh batteries.

Basic Navigation

Navigate using map, waypoints, routes.

1. View Map: Press PAGE to cycle to map page.
2. Set Waypoint: Mark current location (press and hold ENTER/MARK).
3. Go To Waypoint: Select waypoint from list, choose "Go".
4. Follow Route: Create or load route, select "Navigate".
5. Track Back: Retrace path using saved track.
6. Adjust Map: Zoom with buttons, change orientation (North Up, Track Up).

WARNING! GPS accuracy can be affected by terrain, weather, and satellite geometry.

Advanced Features

Area Calculation: Measure area on map. Sun/Moon Times: View sunrise/sunset, moon phases. Geocaching: Support for paperless geocaching (if enabled). Track Logging: Record path for later review.

Care & Maintenance

Clean with soft, damp cloth. Do not use harsh chemicals. Store in cool, dry place. Periodically update software via Garmin Express.

CAUTION! Do not expose to extreme temperatures for prolonged periods. Use only approved USB cable.

Regulatory Information

FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to condition that device does not cause harmful interference. Copyright © Garmin Ltd. or its subsidiaries. For support, visit www.garmin.com/support or contact your local Garmin dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery depleted	Charge device fully. Try different USB cable/power source.
Poor GPS accuracy	Obstructed view, weak signal	Move to open area. Ensure latest software.
Compass inaccurate	Needs calibration	Calibrate compass in Settings > Sensors.
Device not connecting to computer	Driver, cable, port issue	Install Garmin Express. Try different USB port/cable.
Screen unresponsive	Software freeze	Perform soft reset (hold POWER 15 seconds).

Reset: Settings > System > Reset (options: Reset Settings, Delete Data).

Service: Contact Garmin Product Support or authorized service center.